Skip to content
YongehurstLock & Key Co.
Open 24/7(289) 210-9708Open 24/7
Ceramic dish holding keys on a wooden table beside a leafy vase, with a black door, deadbolt and knob behind.

Yongehurst Lock & Key Co.

Meet the locksmiths

A lock only works as well as the door it sits in, so we look at the whole picture. Hinges that have dropped, a strike that has drifted, a frame that swelled after a wet spring: any of these will make a good lock feel like a bad one.

Call (289) 210-9708

Our technicians carry the tools to adjust, shim and reinforce as part of the visit, and they explain what they are doing so you understand why the deadbolt suddenly glides. The same thinking applies to a vehicle door with a worn latch or a shop door whose closer has given up. Fixing the cause instead of the symptom is slower on the day and better for years.

Technician in a cap working a screwdriver at a steel lock plate on a navy door, with an open tool bag behind.
Person seated at a wooden table examining a brass mortise lock body, with a tool roll, small lock parts and a mug.

Residential, automotive and commercial locksmithing.

Good locksmithing is mostly measuring. Backset, bore, door thickness, the gap at the strike, the swing of the hinge: get those right and the hardware fits and turns without a struggle. Get them wrong and a new lock is worse than the old one. We measure twice, order once, and test every door with the key in hand before packing up.

The key you reach for. The door you come home to. Good locksmith work begins with understanding how you use them.

28years in business

24/7open every day

  • Straight talk about your options. We describe what each choice does and what it asks of you in effort, disruption and future flexibility, so the decision is yours.
  • Work explained as it happens. If you want to watch, we tell you what each step is for. If you would rather make a coffee, we give you the summary at the end.
  • Tidiness as standard. A lock change should not leave a mess. We bring what we need to keep the door area clean and we leave it that way.
Call (289) 210-9708

How a visit goes

Describe the property, the hardware and what has changed, and the visit starts from what you have seen.

Illustration: a phone ringing in front of the locksmith’s shop
  1. Illustration: a ringing phone at the shop, then a work van following a route across a small map to the customer’s house

    01

    Planning the levels

    Together we list the doors, then decide who should open everything, who should open a floor and who should open one room. That structure becomes the keying chart.

  2. Illustration: the van outside the house, a photo ID card by the front door, then the options laid out and one chosen

    02

    Pinning to the chart

    Every cylinder is pinned so the right keys work and nothing else does. We check each combination against the chart as we go, not at the end.

  3. Illustration: a key turned in the deadbolt of the front door, with a check mark beside it

    03

    Delivering keys and the record

    You receive the keys labelled by level, the chart and a plain explanation of how to add a door or retire a key later without redoing the whole system.

Call(289) 210-9708

Request a visit

Or call (289) 210-9708 · open 24/7